openwrt_installation
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
openwrt_installation [2017/06/15 17:40] 206.212.226.249 |
openwrt_installation [2018/01/08 10:38] (current) |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| 2. USB flash drive (USB 3.0 Recommended) | 2. USB flash drive (USB 3.0 Recommended) | ||
| - | * Extract the | + | |
| 3. Ethernet Cable | 3. Ethernet Cable | ||
| - | 4. Computer with Eithernet port | + | 4. Computer with Ethernet port |
| === Instructions ==== | === Instructions ==== | ||
| - | 1. Download the software from https://piratebox.cc/openwrt:diy | + | 1. Download the required software |
| + | * Piratebox https://piratebox.cc/openwrt:diy | ||
| + | * Openwrt from http://stable.openwrt.piratebox.de/auto if it is not already installed | ||
| 2. Prepare USB Flash Drive | 2. Prepare USB Flash Drive | ||
| + | * Extract piratebox zip file and copy the "install" folder to the USB drive. | ||
| 3. Set up the Router | 3. Set up the Router | ||
| + | * Set the router to "3G" mode by toggle switch if available | ||
| + | * Connect to the router by Ethernet cable and power it on. | ||
| 4. Install piratebox | 4. Install piratebox | ||
| - | + | * On the computer open a webbrowser and log into your routers configuration page. | |
| - | 5. Configure Piratebox | + | * Check your routers documentation to find the right address. It is usually 192.168.1.1, 192.168.0.1, or 192.168.0.254 |
| + | * Go to System Tools > Firmware Upgrade and select the OpenWRT firmware that you downloaded to your computer | ||
| + | * Select upgrade | ||
| + | * Wait 15-30 minutes for the firmware to finish updating | ||
openwrt_installation.1497573633.txt.gz · Last modified: 2018/01/08 10:37 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
